Leading Manufacturer and Exporter from Mumbai, our product range includes Industrial Flanges such as Plate Flanges, Long Weld Neck Flange, Weld Neck Flange (WNRF), Lapped Joint Flange, Duplex Flanges, Socket Weld Flange (SWRF) and many more items.
RANGE
15 NB UP TO 600 NB IN 150 LBS , 300 LBS, 400 LBS , 600 LBS , 900 LBS , 1500 LBS , 2500 LBS / TABLE 2.5 , TABLE 6 , TABLE 10, TABLE 16,TABLE 25 , TABLE 40, TABLE 64, TABLE 160, TABLE 320, TABLE 400 FORM
SLIP ON , SOCKET WELD , BLIND , LAPPED , SCREWED , WELD NECK , REDUCING , SPECTACLE ,SLIP ON BOSS , PLATE , PLATE BLANK , SCREWED BOSS.
ASTM / ASME SA 182 F 44 , F 45 , F51 , F 53 , F 55 , F 60 , F 61.
Carbon & Alloy Steel
Carbon Steel Flanges
ASTM / ASME A 105.
ASTM / ASME A 350 LF 2 .
Alloy Steel Flanges
ASTM / ASME A 182 GR F 5, F 9 , F 11 , F 12 , F 22 , F 91.
Nickel & Copper Alloy
Nickel Alloy Flanges
ASTM / ASME SB 564 UNS 2200 ( NICKEL 200 ) , UNS 4400 (MONEL 400 ) , , UNS 8825 INCONEL (825) , UNS 6600 (INCONEL 600 ) , UNS 6601 ( INCONEL 601 ) , UNS 6625 (INCONEL 625) , UNS 10276 ( HASTELLOY C 276 ) ASTM / ASME SB 160 UNS 2201 (NICKEL 201 ) ASTM / ASME SB 472 UNS 8020 ( ALLOY 20 / 20 CB 3 )
Copper Alloy Flanges
ASTM / ASME SB 61 UNS NO. C 92200 & ASTM / ASME SB 62 UNS NO. C 83600.
ASTM / ASME SB 151 UNS NO. 70600 , 71500 , C 70600 ( CU -NI- 90/10) , C 71500 ( CU -NI- 70/30) ASTM / ASME SB 152 UNS NO C 10100 , C 10200 , C 10300 , C 10800 , C 12000, C 12200.
Types :
We make carbon steel, alloy steel and stainless steel flanges of quality finishing and fine polishing.
Blind Flanges
These blind flanges are usually used to stop one end of the flanged pipe, a valve orifice or the opening of a pressure vessel.
Slip On Flanges
Slip on flanges are used in quick assembly to save the cost. These slip on flanges are also used in less strict requirements in terms of length of pipe section.
Socket Weld Flanges
Socket weld flanges are recommended for orifice flanges. These socket weld flanges work as substitute for slip-on-flanges in the cases where the diameter of the tube is very small and working pressure is very high.
Lap Joint Flanges
Lap joint flanges are primarily used when quick assembly and disassembly of pipe line section is required under limited working pressure.
Threaded Flanges
Threaded flanges are used in special requirements to work under high temperature and pressure, making sure no welding joint is made at the assembly.
Weld Neck Flanges
Weld neck flanges are mainly used on heat coupling of pipes when there is possibility of expansion of the section while bending stress on the coupling.
